English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
Brief Introduction:
1600C intelligent vertical vacuum tube furnace is widely used in a variety of reaction temperature at about 1600C for CVD experiments; may also be used for vacuum sintering, atmosphere protection vacuum sintering,preparation of nanophase materials, batteries materials,etc.
The main features are as below:
1. Great temperature uniformity.
2. Over temperature protection and alarm
3. PID automatic control via SCR power control.
Technical Parameter:
1600C intelligent vertical vacuum tube furnace is widely used in a variety of reaction temperature at about 1600C for CVD experiments; may also be used for vacuum sintering, atmosphere protection vacuum sintering,preparation of nanophase materials, batteries materials,etc.
The main features are as below:
1. Great temperature uniformity.
2. Over temperature protection and alarm
3. PID automatic control via SCR power control.
Technical Parameter:
| Model | KJ-TL1600-L50CK1W | |
| Tube Furnace |
Display | LED Or LCD Touch screen with extra cost  |
| Temp. | ≤1600℃ | |
| Heating Rate | Suggestion: 0~10℃/min | |
| Temperature Zone | Single Zone 300mm | |
| Heating Element | MoSi2 | |
| Thermocouple | B type | |
| Temperature Control Accuracy | ±1℃ | |
| Tube Size | For OD 50mm Tube Furnace tube will be provide by customer side. |
|
| Temperature Control | PID automatic control via SCR power control | |
| Heating curves | 30 steps programmable | |
| Power | 220V, 50 Hz, single phase at max4KW | |
| Warranty | One year limited warranty (Consumable parts such as heating elements are not covered by the warranty) | |
| Other requirement | Furnace will be with holder for tube Furnace bottom will be with block when customer need to open the bottom, he can remove it. When customer need to close the bottom, he can add the block. |
|
